DCS CT-365BK Cooktop User Manual


 
6
COOKTOP USE
CAUTION:
For warranty coverage, DCS requires that burner adjustments be made by a
qualified technician at the time of installation. Extreme care should be used
when adjustments are made after installation.
CONTROL KNOBS:
The control knobs and knob bezels are readily associated with the burners they control and are
located on the right hand side of the Cooktop.The sealed top burners have an infinite number of heat
settings and there are no fixed positions on the control knobs between HI and SIM (with the exception
of LOW). To light the burner push control knob in and rotate counterclockwise. An audible clicking
sound will be heard and the burner should light immediately. To use, turn the knob to the desired
setting.
COOKING UTENSILS:
For best results we recommend using Professional
Cookware.These can be found at your finer department
stores, specialty cooking shops, or restaurant supply
stores. If using regular cookware be very careful if the
pans have plastic handles, as these large professional
size burners can flame up on the outside of the pan and
melt or bubble the handles.
TOP VIEW OF KNOB BEZEL
THESE GRAPHICS
SHOW BURNER
LOCATION:
RIGHT FRONT
BURNER
“ON”
INDICATOR
LIGHT
BURNERS:
Your new Drop-In Cooktop is equipped with
burners typical of those used in restaurants.
These restaurant style burners are comprised of
high strength die cast aluminum burner bases
and simmer port rings, precision forged brass
port rings, and cast iron burner caps.
Model CT-365 cooktop is equipped with 4
burners rated at 11,000 Btu/hr, and one high-
output burner rated at 17,500 Btu/hr. Model
CT-304 is equipped with 2 burners rated at
11,000 Btu/hr, 1 burner rated at 10,000 and
1 high-output burner rated at 15,500 Btu/hr (for
natural gas). All Drop-In Cooktop burners have
exceptionally low simmer capabilities (See
chart on page 7).The burner system is designed
for maximum cleanability and control. All the
cooktop burners have electronic spark re-
ignition to eliminate continuously burning
pilot; if the flame is blown out, it will relight.
Cap
Brass
Port Ring
Simmer
Ring
Hex Nut
Base
Brass Port
Ring
Locating
Pin
Locating
Pin
Locating
Notch
Locating
Pin Hole
Inside