Filter
Top Products
Create your Soffit Struct
first and attach Soffit B
to each side with screws pr
36" ISLAND VENT HOOD SOFFIT MOUN
6 Mounting Screws
SOFFIT BRACKETS
SCREWED TO BOTH SIDES
OF SOFFIT STRUCTURE
SCREW SUPPORT BARS
ON BOTH SIDES AS SHOWN
CREATE YOUR
SOFFIT STRUCTURE
ACCORDING TO THE
CEILING HEIGHT
THEN ATTACH IT
TO THE CEILING JOIST.
843 fig 1
s
kets
ided
Soffit for DCS-IVH-36 Island Vent Hood
Soffit Installation
7
THE DIMENSIONS GIVEN ARE FOR A 1/2 INCH DRYWALL.
1) Create a soffit structure and attach the soffit brackets as in fig-
ure 1A. Refer to the installation guidelines on Page 6.
2) Attach the soffit support bars as shown in figure 2A.
3) After securing the soffit structure adequately to the ceiling joist,
attach the Island Vent Hood with the mounting screws provided,
figure 3A.
Refer to page 6 on finishing the installation.
SUPPORT
BARS
SOFFIT ASSEMBLY
FOR 36" ISLAND VENT HOOD
10 3/4 "
HEIGHT WILL
VARY
ACCORDING
TO CEILING
HEIGHT
16 3/4 "
The dimensions given
are for a 1/2 " drywa
FIG.3A
FIG.2A
FIG.1A