DCS VS30 Ventilation Hood User Manual


 
WARNING
If the information in this manual is not followed exactly, a fire or explosion
may result causing property damage,personal injury or death. Do not store or
use gasoline or other flammable vapors and liquids in the vicinity of this or any
other appliance.
WARNING
To reduce the risk of injury to persons in the event of a rangetop grease fire,
observe the following: Turn burner off first.Smother flames with a close-fitting
lid,cookie sheet,or metal tray.Be careful to prevent burns. If the flames do not
go out immediately evacuate and call the fire department. Never pick up a
flaming pan - You may be burned. DO NOT USE WATER, including wet
dishcloths or towels - a violent steam explosion will result.Use an extinguisher
ONLY if:
1) You know you have a Class ABC extinguisher,and you already know
how to operate it.
2) The fire is small and contained in the area where it started.
3) The fire department is being called.
4) You can fight the fire with your back to an exit.
SAFETY WARNING:
Turn off power circuit at service panel and lock out panel, before wiring this
appliance.
Requirement: 120 V AC,60 Hz.15 A (minimum) Branch Circuit
Thank you for selecting this DCS Professional Vent Hood. Because of this appliance’s unique features we have
developed this Installation Guide.It contains valuable information on how to properly install your new appliance
for years of safe and enjoyable cooking.Keep this guide handy,as it will help answer questions that may arise as
you use your new appliance.
For your convenience, product questions can be answered by a DCS Customer Care Representative by phone:
1-888-281-5698,email:support@dcsappliances.com,or by mail:
Fisher & Paykel Appliances,Inc.
Attention:DCS Customer Care
5900 Skylab Road
Huntington Beach,CA 92647
www.dcsappliances.com
PLEASE RETAIN THIS MANUAL FOR FUTURE REFERENCE.
A MESSAGE TO OUR CUSTOMERS
1
APPROVED FOR INDOOR COOKING APPLIANCES AND RESIDENTIAL USE ONLY.
PLEASE READ ENTIRE INSTRUCTIONS BEFORE PROCEEDING.
Installation must comply with all local codes.