Filter
Top Products
6
USING THE FRIDGE/BEER DISPENSER
TEMPERATURE CONTROL
Initially set the cold control knob midway between the numbers.
After at least 2 hours, adjust to the temperature that suits you. The
higher the number you select, the cooler the temperature (Fig. 02).
The temperature control knob is located at the bottom, front of the
cabinet, just behind the square opening near the middle of the
venting grill.
DEFROSTING INSTRUCTIONS
Never use a scraper or any tool that might scratch or pierce the
cooling plate. Follow these steps whenever 1/4 inch or more of
frost accumulates;
1. Disconnect the power cord and set the cold control knob to “OFF”
position.
2. Remove contents.
3. Place pans of hot water on the shelf under cooling plate if you wish to speed up defrosting.
Note:
Place a clean cloth under the hot pan of water to protect the glass shelf from breaking.
4. Wipe out the interior and replace contents.
5. Connect power cord to outlet.
6. Set temperature control to desired level.
HELP PREVENT TRAGEDIES. . .
Each year children die because they climb inside a discarded refrigeration product, get trapped inside and
suffocate. Take precautions to prevent such tragedies by removing the door, taping or chaining it shut before
discarding.
ALL REFRIGERATOR MODELS
All refrigerator models automatically defrost their cooling plate during each compressor off cycle. No
manual defrosting is required.
0
3
4
C
O
L
D
E
R
Dial setting established
at the top of the knob
Fig. 02