Oven light
The oven light is switched on by the multifunction selector switch and switches off when
the knob is returned to 0.
To replace a faulty light bulb, proceed as follows.
•
Switch off the power at the wall switch to avoid the possibility of electric shock.
•
Remove the light cover by unscrewing it in an anti-clockwise direction.
•
Unscrew the faulty bulb and fit a new 25 watt bulb rated for 300°C.
•
Refit the light cover.
CLEANING
Cleaning the oven
• Switch off the electrical power supply before cleaning any part of the appliance.
• Open the oven door and allow the oven to cool down.
• For your convenience, the shelves, bake trays, the element guard and side racks may be
removed to improve access.
• Clean the oven with a damp, hot soapy cloth. Do not use a steam cleaner.
• It may be necessary to soak burnt soils with a liquid cleaner to soften them before
scrubbing them with a nylon brush or scouring sponge.
• Heavy soils on the bottom of the oven may require overnight soaking under a sponge
liberally sprinkled with household ammonia. The soil can then be removed the following
morning by washing normally.
• Do not use metal objects or steel wool to clean the oven.
General cleaning
• Switch off the electrical power supply before cleaning any part of the appliance.
• Wipe down glass panels, cabinet, door, control knobs, trims and handle with a hot soapy
cloth.
• Use only liquid household cleaners and avoid abrasive powders, scouring pads and
caustic cleaners.
• Rinse and wipe down with a clean cloth.
• Do not use a steam cleaner.