Filter
Top Products
CONDITION ACTION NOTES AND
COMMENTS
Requires routine cleaning Mild detergent solution
applied with soft sponge or
cloth. Rinse and wipe dry.
If possible use warm to
hand-hot water. A 5%
addition of ammonia is
beneficial.
Finger prints Pre-treat finger marks with
alcohol or an organic solvent.
Follow immediately with
routine cleaning.
Minimize re-occurrence by
applying a wax or silicone
based household polish to
the clean dry surface.
Wipe with a little baby oil and
a soft lint free cloth.
Buff to shine.
Apply whenever necessary.
Stubborn stains and
discolouration
Use a little Ceran cleaning
paste. (available from Defy
Service Centres).
Rinse and dry.
Repeat several times rather
than resorting to a single
aggressive cleaning method.
Grease and fat splatter. Wipe off excess with a soft
cloth or paper towel. Use a
water borne degreasing agent
(dishwashing liquid). Follow
up by routine cleaning.
Scratches on the brushed
finish.
For slight scratches, use a
nylon pad loaded with an iron
free abrasive polishing
compound. Follow the
direction of the original
texture. Follow up with
routine cleaning.
For deep scratches use a
coarser abrasive initially and
follow up as for light
scratches.
Deep scratches will be
difficult to remove
completely. Do not use steel
wool or metal scourers
unless they are made from
stainless steel.
It must be appreciated that some of the above suggested procedures will alter the
surface appearance of the treated area.
They should therefore only be applied with due consideration and care.