Filter
Top Products
CONDITION ACTION NOTES AND
COMMENTS
Requires routine cleaning Mild detergent solution applied
with soft sponge or cloth. Rinse
and wipe dry.
If possible use warm to hand-
hot water. A 5% addition of
ammonia is beneficial.
Finger prints Pre-treat finger marks with
alcohol or an organic solvent.
Follow immediately with routine
cleaning
Minimize re-occurrence by
applying a wax or silicone
b
ased household polish to the
clean dry surface
Wipe with a little baby oil and a
soft lint free cloth. Buff to shine
Apply whenever necessary
Stubborn stains and
discolouration
Use a little Ceran cleaning paste.
(available from Defy Service
Centres)
Rinse and dry.
Repeat several times rather
than resorting to a single
aggressive cleaning method
Grease and fat splatter. Wipe off excess with a soft cloth
or paper towel. Use a water borne
degreasing agent (dishwashing
liquid). Follow up by routine
cleaning.
Scratches on the brushed
finish.
For slight scratches, use a nylon
pad loaded with an iron free
abrasive polishing compound.
Follow the direction of the
original texture. Follow up with
routine cleaning. For deep
scratches use a coarser abrasive
initially and follow up as for light
scratches,
Deep scratches will be
difficult to remove
completely. Do not use steel
wool or metal scourers unless
they are made from stainless
steel.
It must be appreciated that some of the above suggested procedures will
alter the surface appearance of the treated area.
They should therefore only be applied with due consideration and care.