Filter
Top Products
MAINTENANCE
Lift-off oven door
• The oven door may be removed to improve access to the oven cavity and facilitate
cleaning.
• Open the door fully, turn the appropriate washers to lock the two hinges (see sketch)
and, using both hands, lift the door out as shown.
• After cleaning, refit in reverse order.
Removing the inner door glass.
• The glass may be removed for cleaning purposes
by removing the two screws which hold it in
place.
• It is now possible to clean the inside of the outer
glass if required.
• Wash the glass in hot soapy water, rinse and dry.
• Re-assemble by carefully locating the rubber seal
in the embossed groove before fitting the glass.
The glass is marked “THIS SIDE TOWARDS
OVEN”.
Re-fit the two securing screws.
Removing the side racks and shelves
• The side racks and shelves may be removed for
cleaning purposes.
• Remove the bottom bake element guard.
• Slide the shelf out fully against the shelf stop.
• Lift the shelf slightly and slide it out
• The side racks may be removed by pulling the
bottom stay slightly downwards thereby
dislodging it from the retainer at the bottom
centre. Lift the racks free of the retaining slots in
the oven wall.
• Replace in reverse order of disassembly.