Filter
Top Products
Page 6
Replacing the light bulbs.
Glass cover
Retaining ring
Housing
Light bulb
• Switch off the electricity supply.
• If the bulb has recently failed, it
might still be very hot. Allow the glass
cover to cool before attempting to re-
place the bulb.
• Hold the glass cover and unclip the re-
taining ring. Be careful not to let the
glass cover fall.
• Replace the light bulb with a commer-
cially available OSRAM 12V 10W or
equivalent bulb.
• Fit the glass cover and replace the re-
taining ring.
• Switch on the electricity supply.
• Select the fan speed you require.
• Push button ‘3’ for high extraction level.
• Push button ‘2’ for medium.
• Push button ‘1’ for low.
• The fan indicator light will glow when
the fan is operating.
• To switch the fan off, push the motor
speed OFF button ‘0’.
• If required, you may illuminate the
cooking area by switching the hood
lights on.
• Leave the hood running for a short pe-
riod after the cooking has been com-
pleted to clear any smoke and odours.
Operation.
Lights
on/ off
Fan speed
Fan
indicator
light
0123
Motor speed
Off button