Filter
Top Products
Page 6
Optional Carbon pad filters.
• Remove the plastic outer protective lin-
ing on the grease filters before fitting
them to the extractor hood.
• To fit the filters, engage the two lugs at
the rear of each filter into the rectangular
slots of the extractor hood frame, lift the
filter and press the handle catch inwards .
• Engage the filter and release the catch.
• To remove the filter, for cleaning pur-
poses, reverse the procedure described
above.
Grease filters.
• Carbon pad filters assist in removing any
unwanted cooking odours from the at-
mosphere.
• If your installation ducts filtered air to the
outside, the carbon pad filters are not re-
quired.
• Should you require them, factory ap-
proved, carbon pad filters and installation
kits may be purchased from your nearest
Defy service Centre or their authorised
agents.
STEEL ROD REMOVED
STEEL ROD IN PLACE
GREASE FILTER
CARBON PAD FILTER