Defy Appliances DDW 157 Dishwasher User Manual


 
8
Rinse aid prevents water and calcium streaking on
dishes and speeds up the drying process. It is advisable
therefore to always ensure that there is an adequate
amount of rinse aid in the dispenser.
You can adjust the amount of rinse aid released during
a programme by turning the dispenser regulator (
C
)
The regulator level may be set between 1 (minimum)
and 6 (maximum).
According to the cleanliness and drying results obtained,
adjust the dose of rinse aid by means of the six position
regulator.
If lime marks appear select a lower setting.
If water marks appear select a higher one.
The machine is pre-set at the factory to level 3.
How to fill the rinse aid dispenser.
Open the rinse aid container lid by pressing on the tab
(see sketch 1)
Fill the container with rinse aid to the "MAX" mark..
Close the lid (
E
) A clicking sound will indicate that
the lid is properly closed.
Remember to close the lid after every re-fill.
Wipe up any spilt rinse aid.
A sight glass allows inspection of the rinse aid level
in the dispenser. If the rinse aid appears to be diluted
or is lighter in colour, it needs to be replenished.
Visual indicator
Dark:sufficient rinse aid
Light: add rinse aid
Before loading any dishes remove large scraps of food
thereby preventing the filters from blocking.
Very dirty pots or frying pans should be soaked in
water before they are placed in the dishwasher. This
allows dirt to be removed more easily.
Load plates with the top facing forwards and cups and
pans with the opening facing down.
Rinse aid
Only use rinse aid specifically intended
for dishwashers
E
C
Loading
The dishwasher has a twelve
place setting capacity