Filter
Top Products
6 Dell PowerEdge Cluster FE100/FL100 Platform Guide
!!
The following sections describe adding peripherals for PowerEdge 2400, 2450, 4300,
4350, 4400, 6100, 6300, 6350, and 8450 cluster nodes.
$%&'
()"
*
#
)($
The following list provides PCI slot assignment information for the system’s PCI
buses, HBAs, and the Dell OpenManage Remote Assistant Card 2 (DRAC 2).
• PCI buses
— PCI bus 0: PCI slots 1 through 5 are 64-bit, 33-MHz.
— PCI bus 1: PCI slot 6 is 32-bit, 33-MHz.
• HBAs
— Dell recommends installing the HBAs on separate PCI buses to balance the
load on the system.
• DRAC 2
— If you are currently using a DRAC 2 or plan to use one in the future, install it
in PCI slot 6.
)($*
The following list provides PCI slot assignment information for the system’s PCI
buses and HBAs.
• PCI buses
— PCI bus 0: PCI slots 1 through 3 are 32-bit, 33-MHz.
• HBAs
— You can install HBAs in any available PCI slot.
96etttb0.book Page 6 Thursday, July 6, 2000 9:36 AM