DeLonghi CTF2134C/S Toaster User Manual


 
CTF2134C/S Toaster
3
Thank you for choosing this De’Longhi Toaster.To get the
best results from your new appliance it is advisable to read
these instructions carefully before using the appliance.This is
the only way to ensure optimum results and maximum safety.
Using for the first time
Carefully unpack the toaster and remove all of the packaging material.
Place the toaster on a flat working surface away from water
taps and sinks.
Before using for the first time, to eliminate the new smell, oper-
ate the toaster without bread inside for at least 5 minutes.
Ensure there is plenty of ventilation in the room.
Check that the mains supply corresponds to the voltage on the
the appliance rating plate. Connect the appliance to a correctly
earthed power socket (minimum rating 10A) only.
The manufacturer declines all liability for any accidents due to
the incorrect earthing of the appliance.
Please read safety warnings and electrical requirements before
using this appliance.
Using the Toaster
•Make sure that the control lever is raised and the variable
browning control dial is set for a medium toasting level.
Connect the appliance to the electrical outlet. In order to elim-
inate the “new” smell at the first use, operate the appliance
without any food inside for at least 5 minutes. Ventilate the
room during this operation.
Insert the slices of bread into the bread toasting slots and
lower the control lever until it is all the way down.
When the control lever is depressed, the flaps on the top of the
bread toasting slots will close and the fan, which allows faster
toasting, will switch on to maintain cooler touch sides even
after several toasting cycles.
In order to keep the toaster cooler touch,the fan will continue to
operate for another minute even if the toaster has been switched off.
Note: If the appliance is not connected to the electrical outlet,
the lever will not go all the way down.
•When the toasting is finished,the control lever returns to the
raised position, raising the toasted bread slices at the same time.
If the bread is not sufficiently toasted, select a darker degree of
toasting by turning the browning control dial. If it is too dark,
select a lesser degree of toasting.
The toasting can be interrupted at any time by simply pressing
the stop/clear button.
Caution: the Bread toasting slots and the flaps become very hot
during operation. Do not touch.