Filter
Top Products
CTF2134C/S Toaster
4
•Never use the toaster without bread inserted.
• Do not use very thin or broken slices of bread.
•Do not insert other foods that may drip during the cooking
process. As well as making the cleaning procedure more diffi-
cult it may be a potential fire hazard. It is also very important to
clean the crumb tray before each use.
•Do not insert (by force) foods that are too big for the slots.
•Do not insert forks or other utensils into the toaster in order
to remove bread, as it may damage the resistance coils of the
appliance. Remove the plug from the socket and turn the appli-
ance over, gently shaking it to remove the lodged items.
Cleaning and maintenance
• Before cleaning or maintenance, always unplug from the mains
socket.
• Allow the appliance to cool down before cleaning.
•Use a damp cloth only to clean the outside of the appliance.
•Do not use abrasive detergents as these could ruin the surface.
• DO NOT IMMERSE IN WATER.
• After using the appliance, always unplug from the mains and
empty the crumb tray on the bottom of the toaster.
• If a slice of toast remains stuck in the slot, unplug the toaster
from the mains,turn upside down, and shake gently.
• NEVER TOUCH ANY PART OF THE TOASTER WITH SHARP
UTENSILS, ESPECIALLY INSIDE THE TOASTING SLOTS.
Safety Warnings
• The appliance is exclusively for the use for which it has been
manufactured. Any other use is to be considered inappropriate
and therefore dangerous. The manufacturer cannot be held
responsible for eventual damage caused by inappropriate,
improper or irresponsible use and/or for repairs made to the
product by unauthorised personnel.
• After removing the appliance from the packaging, make sure
that the product is complete and in perfect condition.
• The plastic bag in which the appliance was packaged should be
kept out of reach of children as it poses a suffocation hazard.
• In order to remove the dust that may have accumulated on
the appliance, simply dust it off with a soft cloth.
• Before inserting the plug into the electrical socket, make certain:
- The voltage of the socket corresponds to the value indicated
on the information label, attached to the appliance.
- The electrical socket is adequately earthed, the manufacturer
declines any responsibility for the lack of observation of this
norm.