Filter
Top Products
7
PROGRAM AUTOMATIC BREW (TIMER FUNCTION) (continued)
3. Press the CLOCK button until the desired brewing time is displayed
(See “How to Set the Clock” section of the manual).
4. Press the ON/OFF button to confirm the automatic time selected.
NOTE: The display panel and the on/off indicator light will flash.
5. Press the PROGRAM button to return to the current time of day (the
ON/OFF button will continue to flash.) The brewing cycle will begin
once the set time is reached and the ON/OFF button stops flashing.
6. If you want to check the automatic time selected, press the
PROGRAM button.
7. To override the automatic brew function, press the ON/OFF button
and the coffee maker will start immediately. Press the ON/OFF
button again to switch the coffee maker off.
OPERATING YOUR COFFEE MAKER
PREPARING COFFEE MAKER FOR BREWING COFFEE:
1. Place the coffee maker on a flat, level surface away from any edge.
2. Plug the unit into a 120V / 60Hz only outlet.
3. The lid of the carafe must be fitted properly during the brewing
process. And the carafe must be set on the base.
4. CAUTION: The lid of the coffee maker must be completely closed
during operation.
FILLING THE WATER RESERVOIR AND USING THE WATER FILTER:
5. Open the lid located at the top of the coffee maker. Lift out the
water tank.
6. Separate the water filter holder by pulling the water filter holder
apart. Place the water filter inside the water filter holder. Fit the
water filter holder back together.
7. Turn the handle on the water filter holder and align the arrow on the
base with the letter for the current month (Ex. F for February).
8. Lower the water filter holder into the water tank and place it into
position at the base of the water tank.
9. Fill the tank with the desired amount of cold water. The water level
must be between the top and bottom cup marks. NOTE: Do not fill
above the MAX level. Alternatively, the water tank can be filled
when inside the coffee maker, but take care not to spill. Fill the
carafe with the desired amount of water and carefully pour into
water tank.
10. Replace the water tank back into the coffee maker. The water level
indicator lets you know much water is in the water reservoir.