Filter
Top Products
A
B
Flame
failure
probe "T"
Ignitor "S"
CORRECT POSITIONING OF THE TRIPLE RING BURNER
Figure 26
Figure 27
Figure 28
Figure 29
✓ The triple ring burner must be correctly
positioned (see fig. 26 ); the burner ribs
must be fitted in their housing as
shown by the arrow.
The burner correctly positioned must
not rotate (fig. 27 ).
Then position the cap “A” and the ring
“B” (figs. 27 - 28). They shall be level.
✓ The pan support shall be correctly po-
sitioned as indicated in fig. 29 . The
pan support shall be level and must
not rotate.
23