Filter
Top Products
15
TILTING GRILL
■ The grill is secured to the rear wall of the oven on a hinge system that allows it to be
lowered to allow proper access when cleaning the oven ceiling (g. 12).
■ To lower the grill element: use a at-head screwdriver or a small coin to loosen the
element xing screw (g. 11).
■ When you have nished cleaning the oven ceiling, raise the grill element and screw
the element xing screw back onto the stud. Make sure that the xing screw is tighte-
ned and the element is held securely in place.
■ The grill element itself is self-cleaning.
Fixing screw
Stud
Figure 11
Figure 12
Figure 10
GREASE FILTER
■ A special screen is provided at the
back of the oven to catch grease par-
ticles, mainly when meat is being roa-
sted (g. 10).
■ Clean the lter after any cooking!
The grease lter can be removed for
cleaning and should be washed regu-
larly in hot soapy water (g. 10).
■ Always dry the lter properly before t-
ting it back into the oven.
CAUTION: When baking pastry etc. this
lter should be removed.