Filter
Top Products
22
Figure 15
A
U
T
O
P
Function
selector knob
Digital electric
programmer
SETTING THE COOKING (ONLY FOR THE COOKING FUNCTIONS)
Way 2: SETTING THE COOKING TEMPERATURE WITH THE
PROGRAMMER
4
5 6
2a 2b
The temperature set is shown on the electronic pro-
grammer display and can be varied, with 5 °C intervals,
by pressing the related keys of the programmer.
During the cooking the oven temperature is measured
by a sensor inside the cavity and is shown on the pro-
grammer display.
1. SELECTING THE COOKING FUNCTION
Turn the selector knob to the cooking function
required.
The pre-set temperature appears on the program-
mer display. °C ashes on the display for 3 seconds.
The heating elements start cooking immediately.
2. SETTING THE COOKING TEMPERATURE
The temperature can be changed when °C is
ashing on the display
2a
If °C is not ashing press key 4 of the programmer.
2b Press key 6 to increase the temperature or key 5
to reduce it.
The maximum temperature which can be set is 250
°C while the minimum temperature is 50 °C.
Note: When °C becomes steady the value shown
on the display indicates the oven cavity tempera-
ture.
Caution: If a temperature below the minimum value
(50 °C) is set the system switches off automatically
and OFF appears. In this case repeat the procedure
from point 2.
3. SWITCHING OFF
Turn the selector knob to position 0 (oven OFF).
The programmer display shows the time.