Filter
Top Products
1) Remove dust cover (1) from end of grater before operation. (Figure 2)
2) Cut food into small squares. If you are grating cheese, remove the skin of the
cheese before grating. Place cut food into the top opening of the food
receiver (4) and push down. (Figure 3)
3) Lower the lever (6) and press the on/off and pulse switch (7) located on the
lever to grate food. Be sure to have either a plate or bowl to catch the grated
food. Or you can grate directly over the food being served.
4) To terminate operation discontinue pressing the on / off and pulse switch. Wait
until the stainless steel grating drum (2) has stopped rotating completely. Place
your finger inside the stainless steel grating drum and rotate counter-clockwise
about a 1/4 turn and carefully remove it for cleaning. (Figure 4) See the
“Cleaning Your Electric Food and Cheese Grater” section of this instruction
manual for details.
5) To replace the stainless steel grating drum (2), slide it back into the opening and
rotate clockwise by about a 1/4 turn. You will hear a click, indicating that the
stainless steel grating drum has locked into place.
6) After use, carefully dismantle detachable parts. First, remove the stainless
steel grating drum (2) according to direction number 4 in the “Operating Your
Electric Food and Cheese Grater” section of your instruction manual. Second,
lift the lever (6) and pull out the food receiver (4). (Figure 5)
OPERATING YOUR ELECTRIC FOOD AND CHEESE GRATER (con’t)
FIGURE 3
FIGURE 4 FIGURE 5
FIGURE 2