Filter
Top Products
12
ANTI-TIP STABILITY DEVICE INSTALLATION INSTRUCTIONS
1. The anti-tip bracket has to be attached as shown on figure below (only rear central
position), it has to be fixed on the floor and on the rear wall by no. 4 (four) suitable
screws (not supplied).
2. After fixing the anti-tip bracket, slide range into place. Be sure the rear central foot
slides under the anti-tip bracket attached.
=
=
Dotted line showing the position
of the range when installed
ANTI-TIP STABILITY
DEVICE FIXING
Rear central
feet of range
Fig. 1.10
Anti-tip
stability device
YOU MUST USE STABILITY
ANTI TIP BRACKET TO
PREVENT UNIT FROM
TIPPING.
ቢ