Filter
Top Products
21
ባ
Anchorage
clip
Anchorage
clip
I
I
V
V
■ Remove the burner as shown in figure 2.17.
■ Using a 7 mm box spanner, unscrew the injector
(indicated by the arrow in fig. 2.18) and replace it by the
proper one according to the kind of gas.
■ Then replace the burner and other components repeating
the above steps in reverse order.
IMPORTANT: Pay special attention to replace correctly
the safety valve probe "V" and the ignition electrode "I"
as per figures 2.19 and 2.20. Check the correct operation
of the safety valve and the ignition electrode.
Fig. 2.17
Fig. 2.19 Fig. 2.20
Fig. 2.18