Filter
Top Products
EC220
FROTHER and STEAM NOZZLE MAINTENANCE
Unscrew the frother by rotating
clockwise and pulling downwards.
3 4 5
Frother and steam nozzle parts can be cleaned thoroughly by using De’Longhi Milk Clean.
Clean frother with warm
running water and use a
needle to clean the two holes.
Clean the inside of frother
with warm water and use
a needle to clean the
center hole.
1 2
Thoroughly clean steam nozzle with cloth
and warm water.
Replace the frother by
inserting and rotating
counterclockwise.
CLEANING and MAINTENANCE: DESCAILING
Descaling
You must descale the coffee machine about every
200 coffees.
Important!
Descaler contains acids which may
irritate the skin and eyes. It is vital to respect the
manufacturer’s safety warnings given on the
descaler pack and the warnings relating to the
procedure to follow in the event of contact with
the skin and eyes.
NOTE: Failure to descale the appliance as
described above voids the guarantee.
1. Turn dial to
position.
2. Completely empty the water tank (A).
3.
Pour the descaler
(B)
and water
(C)
into the tank,
according to the manual instructions.
4.
Place an empty container
(D)
with a minimum
capacity of 50 oz under the hot water spout and
boiler outlet
.
5.
When OK light is green, turn dial to position.
Solution will come out from the boiler outlet.
6. Turn the steam dial
to
allow solution to come out
from the frother spout and turn dial to
position.
Let unit rest for 15 minutes.
A
B
C
D
Important!
• Descaler contains acids which may irritate the skin and eyes. It is vital to respect the manufacturer’s safety warnings
given on the descaler pack and
the warnings relating to the procedure to follow in the
event of contact with the skin
and eyes. Use De’Longhi
descaler only. Under no circumstances
should you use sulphamic or acetic based descalers.
Their use invalidates the guarantee. Failure to descale the
appliance as described also invalidates the guarantee.
7.
Repeat steps 5 and 6 until water tank is empty
(don’t wait 15 minutes between steps)
.
8.
To eliminate the solution and lime scale residues,
rinse the tank and fill it with fresh water (without
descaler); empty the containers and place them
under the boiler outlet and hot water spout.
9.
Turn dial
to position
until water tank
is empty.
10.
Repeat steps 8 and 9.
The appliance is now ready for use.
Repairs to the coffee machine relative to lime scale
problems are not covered by the warranty if the
descaling procedure described above is not performed
on a regular basis.
Important! Danger of Burns
Hot water containing acid flows from
the spout. Avoid contact with splashes
of water.
12
11