Filter
Top Products
ECAM23260
11
TEST YOUR WATER
Measuring Water Hardness
1. Remove the “total hardness test” indicator paper attached to the instructional
manual from its pack.
2. Immerse the paper completely in a glass of water for one second.
3. Remove the paper from the water and shake lightly. After about a minute,
1,2,3, or 4 red squares form, depending on the hardness of the water.
Each square corresponds to one level.
Choosing the water hardness
is very important to set the
correct frequency of the
descaling cycles.
Keeping the machine clean
will improve its performance
and prolong the life of the
machine.
1 2
3
With the machine on, hold
button for 6 seconds.
Press OK
button to
confirm
selection.
Turn dial to
select level of
water hardness
according to
indicator paper.