Filter
Top Products
12
WATER FILTER
A B C D E
Please note! The filter lasts about two
months if the appliance is used normally.
If the coffee maker is
left unused with
the filter installed, it will last a maximum
of three weeks.
8.
Place a container with a
minimum capacity of 3.4
oz./ 100 ml under the cap-
puccino maker
(E)
.
9.
Turn dial till icon is
displayed.
10.
Press BREW button. Hot
water will be delivered.
11.
Repeat step 9 till you have a
regular flow of hot water.
Installing the filter
1. Remove the filter from packaging
and rinse the filter with about half
a liter of tap water.
2.
Turn the date indicator disk (A)
until the next 2 months of use
are displayed.
3.
To activate the filter, put it
under tap water until water
overflows the side openings
for more than 1 minute (min.
500 ml) (B).
4. Remove the water tank from
the appliance and fill with
water.
5. Insert the filter in the water
tank and immerse it completely
for ten or so seconds, sloping
it to enable the air bubbles to escape (C).
6. Insert the filter in the filter housing (D) and
press as far as it will go.
7. Close the tank with the lid (E), then place
the tank in the machine.