Filter
Top Products
6
OPERATING INSTRUCTIONS
FOREWORD
The Delta Unisaw is a 10" right tilting arbor saw. The Delta Unisaw features set the standards in the table saw industry.
UNPACKING AND CLEANING
Carefully unpack the machine and all loose items from the shipping container(s). Remove the protective coating from
all unpainted surfaces. This coating may be removed with a soft cloth moistened with kerosene (do not use acetone,
gasoline or lacquer thinner for this purpose). After cleaning, cover the unpainted surfaces with a good quality household
floor paste wax. NOTE: REMOVE THE STYROFOAM PACKING AND ANY OTHER ITEMS FROM THE INSIDE OF THE
SAW CABINET. IMPORTANT: The saw is shipped with the saw arbor in the 45 degree position. NOTE: THE HAND
WHEEL MUST BE ASSEMBLED TO THE SAW, SEE THE SECTION “ASSEMBLING BLADE TILTING MECHANISM”,
THEN PROCEED WITH THE FOLLOWING. Loosen locking knob on the handwheel, and turn handwheel until the saw
arbor is in the 90 degree position and remove the styrofoam packing from inside the saw cabinet. Tighten locking knob.
Fig. 1
UNISAW
1. Unisaw
2. Switch (shown with a LVC switch)
3. Motor cover
4. Blade guard and splitter bracket
5. Support rod
6. 5/8" Internal tooth washer
7. 5/8-18 Jam nut
8. Upper bracket for splitter
9. Lower bracket for support rod
10. 5/16" l.D. Flat washers (2)
11. 5/16" l.D. Lockwashers (3)
12. 5/16-18 x 1" hex head cap screws (4)
13. Arbor wrenches (2)
14. 1/8" and 5/64" hex wrenches
15. Miter gage
16. Flat washer for miter gage handle
17. Handle for miter gage
18. Cap for miter gage handle
19. Dust chute adapter
20. #10 x 1/2" hex washer head
screws (8)
21. Extension Wing
22. Hangers for rip fence (2)
23. 5/16-18x1” Flat head screw for mounting switch (for GPE
switch only)
24. 5/16” Flat washer for mounting switch (for GPE switch only)
25. 5/16-18 Hex nut for mounting switch (for GPE switch only)
26. Cable Tie
27. Handwheel
28. Locknob
29. 7/16-20x1¼" Hex head screw (3)
30. 7/16" Flat washer (3)
31. Fiber washer (for handwheel)
32. Key (for handwheel)
1
2
Fig. 2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
30
29
31
32