Filter
Top Products
4
®
HOW TO CLEAN
1. Your popcorn popper should be cleaned after each
use. Always allow popper to cool completely before
cleaning.
2. Clean the non-stick surface and base by wiping
with a damp soapy dishcloth or sponge. Wipe the
surfaces with a damp cloth and dry. Do not use
abrasive pads or powders on the non-stick finish as
scratching can occur.
NOTE: Never immerse the base in water or other
liquid for cleaning.
3. Remove the stirring rod from base by unscrewing
the center knob. Rinse the stirring rod, plastic cap,
popper cover and center knob in hot soapy water,
rinse thoroughly and dry. Replace the stirring rod,
after cleaning base, making sure it fits in place
properly.
4. Replace all the parts after they are completely dried.
Note: After frequent use, the non-stick surface may
discolor. To remove this discoloration, use a soft
cloth saturated with lemon juice or vinegar and
completely rub the surface. Wipe the surface with a
damp cloth and dry.