Filter
Top Products
3
G I O VA N N A
by
I t a l y
Before First Use
1. Remove the Hand Blender from the package and remove
all packing materials. Read all instructions carefully.
2. Wash the blade portion of the hand blender according to
instructions.
HOW TO OPERATE THE
DENI HAND BLENDER™
1. Position the provided measuring/mixing jug or a contain-
er of comparable size that holds the food to be mixed on
a flat surface.
2. Pour the ingredients to be blended in the measuring
jug provided or into a container of comparable width
and depth and avoid over-filling. For best results for non-
liquid items, evenly distribute the contents using a palette
knife.
3. Place the blender in the measuring jug and position it
directly on the food to be blended. Hold the container
steady with your other hand.
4. Press the on/off switch to the ON position.
IMPORTANT Do not let the machine operate continu-
ously for more than 60 seconds.
It is advisable to press the on/off switch for a few sec-
onds only and repeat this operation in intervals. This
makes it possible to continually check the consistency
of the food. After each use of 60 continuous seconds,
the unit must cool down for 3 minutes.
5. Move the blade slowly through the food. Be sure to
move it up, down and sideways to ensure thorough
mixing. When contents to be blended are at the
desired consistency, turn the blender to the OFF posi-
tion and unplug. Remove it from the measuring/mix-
ing jug.
6. If some of the food remains on the blades of the
blender, use a palette knife to delicately remove it from
the blade. NEVER use your fingers to remove the food,
to avoid injury from the sharp blades.
7. Wait until the blades in the blender have completely
stopped rotating before attempting to remove food or
to clean the unit.
8. Unplug blender and rinse under running water imme-
diately after using for easy cleanup.
NOTE: Always unplug from outlet when not in use.
hand blender instructions 7/15/03 10:38 AM Page 3