Deni 4400 Blender User Manual


 
4
HOW TO CLEAN
Unplug the hand blender from the outlet.
Rinse the blade under warm running water by holding
the unit by the motor section. DO NOT TOUCH THE
BLADE. DO NOT IMMERSE THE MOTOR SECTION IN
THE RUNNING WATER.
Motor section may be wiped clean with a damp cloth.
If food particles are not rinsed off under the running
water, place a drop of dish detergent in the measuring
jug and fill half way with water. Plug cord back into
outlet. Immerse the hand blender in the water and
operate the unit for about 10 seconds. Unplug, and
rinse again under running water to remove excess
detergent.
Never wash any parts in a dishwasher.
HELPFUL HINTS AND TIPS
Read all of the instructions.
If you are using the hand blender in a sauce pan, be
sure to remove the sauce pan from the stove or other
heat source before applying the blender to the food to
be mixed. This appliance is not to be used over a stove
or any other heat source.
If you are pureeing food, slowly add liquid, a little at a
time, until desired consistency is reached.
Do not use this appliance to chop ice, as it can damage
the blades. Add any ice to the mixture after the blending
process is completed.
Do not use this unit to beat egg whites.
hand blender instructions 7/15/03 10:38 AM Page 4