To keep the refrigerator working properly, a qualified service technician should, at least once a year,
inspect the connections, the control system, the LP gas pressure and flue baffle. The service and mainte-
nance described in this section is to be performed by service personnel only.
MAINTENANCE & SERVICE
Replacing the fuses
Power module
Turn off the refrigerator.
Put back the power module cover.
DM2652 (WITH OPTIONAL FAN), DM2852 (WITH OPTIONAL FAN),
DM2862 (WITH OPTIONAL FAN), NDM1062 & NDR1292
Inline fuse
power.
Put the holder back together.
3.
3.
ELECTRIC EQUIPMENT
Heater
The heat necessary for the operation of an absorption cooling
unit is supplied by an electric heater mounted in a pocket of the
boiler system.
one electrical heater for
3-way models are equipped with two electrical heaters - one for
Replacing the heater
Turn off the refrigerator.
With a pair of pliers, unfold the lug holding the lid
accessible.
Turn and lift the heater out of its pocket.
Put back the insulation wool.
Fuses
-
3-way models are equipped with 3 fuses - two fuses in the
power module and one in-line blade fuse.
3.
7.
CAUTION
If your refrigerator stops cooling, immediately turn the refrigerator off and see a Dometic dealer.