Filter
Top Products
—
Place the needed sound source devices (e.g. CD-Player, turntable) or microphones on a secure even location
and, if necessary, establish mains connections
— Connect all the gear to the MP7 (Fig. 2).
— Employ cables with stereo phone-type plugs to connect the AM12 to the MONO OUT of the MP7. Set the
LINE IN-control on the AM12 at its center position. This lets you control the AM12’s volume setting from the
MONO OUT-control on the MP7.
— Set all faders on the MP7 at their minimum position and turn all output controls (e.g. MONO OUT)
counterclockwise as far as possible. Switch on the power of all included components in the following sequence:
1. Sound source equipment, e.g. CD-Player, turntable, etc.
2. MP7
3. AM12 active monitors
Following this order when switching on your system prevents unpleasant power-on noise and feedback.
— Your PA-system is now ready for operation!
(Fig. 2)
STANDARD INSTALLATION
42