Filter
Top Products
15
Control Panel (Inside of the front panel)
Descriptions of LEDs and buttons:
1. Ice Full (Red) LED: Ice Full indicator light.
When this LED is lit, the ice storage bin is full of ice or there is something
obstructing the ice-full probe. The unit will stop working. When ice cubes
are taken out of the ice storage bin, clearing the ice-full probe, the red
LED will keep flashing for 3 minutes.
Then the unit will restart and return to the ice making mode.
2. Ice Making (Green) LED: Ice Making indicator light.
When this LED is lit, the unit is working in the Ice Making mode controlled
by a temperature probe on the evaporator. When the green LED is
flashing, the unit is working in the Ice Making mode controlled by a fixed
timer.
3. Ice Harvest (Yellow) LED: Ice Harvest indicator light.
When this LED is lit, the unit is working in the Ice Harvest mode controlled
by a temperature probe on the evaporator. When the yellow LED is
flashing, the unit is working in the Ice Harvest mode controlled by a fixed
timer.
4. Clean button: When this button is pressed, the unit enters the
Cleaning mode. The green and yellow LEDs flash together. To stop the
Cleaning mode, just press the button again.
5. Mode button: Mainly for service. When this button is pressed, unit can
change from Ice Making mode to Ice Harvest mode, or from Ice Harvest
mode to Ice Making mode. You can judge the mode from the status of the
green and yellow LEDs.
6. Ice size adjust: Turn the screw clockwise, and the size of the
individual ice cubes will be larger in the next cycle; the cycle time will be
longer. Turn the knob counter-clockwise, and the ice size will be smaller
in the next cycle. Note: It is not recommended that the ice size be
adjusted after installation.
IMPORTANT:
• It is not recommended that the ice size be adjusted unnecessarily since
this could damage the machine’s controls.
• Do not let water contact the control box.
• If the red, green and yellow LEDs are flashing together, the machine is
not working. The major fuse of the control box has failed. Call for service.
Major Functions
1. Completely automatic operation.
2. When the ice storage bin is full, the machine stops making ice
automatically and starts again after the cubes are removed.
3. The different colors of the LED display indicate various operating
modes.
4. The fan motor responds to the ambient temperature. If it is cold, the
motor will stop working to keep the cooling system in good working
condition.
5. Ice cube size is adjustable.
6. A sensitive probe and accurate timer enhance the performance of the
ice maker.
7. Built-in compressor protection system.