Filter
Top Products
7
Operating Instructions
ENERGY OPTION SELECTIONS
Sanitize
To sanitize your dishes and glassware, select the
SANITIZE option. SANITIZE touchpad will turn
white. This option heats the water temperature in
the final rinse to 157°F (69.4°C) and maintains that
temperature for 7 minutes. SANITIZE is available in
Auto, Cookware, and Normal cycles. Only these
sanitization cycles have been designed to meet
NSF requirements.
The cycle time will be extended until the proper
water temperature is reached. Washing action will
continue during the water heating delay. For best
results, the incoming water temperature should be
at least 120°F (49°C).
If the SANITIZE option was selected, “SA” will be
displayed at the end of the cycle. “SA” will not
display at the end of the cycle if the NSF
requirements for sanitization are not reached. The
sanitization criteria may not be satisfied if there is
an interruption of the cycle, a power failure occurs,
or if the incoming water temperature is below 120°F
(49°C).
To turn off the SANITIZE option, press SANITIZE a
second time. SANITIZE touchpad will turn blue.
OPERATION SELECTIONS
Delay Time
The Delay Time option allows you to automatically
delay starting your dishwasher from 1 hour to 24
hours.
Press the DELAY TIME touchpad until the desired
delay time shows in the STATUS window press
START/CANCEL to activate. Display will indicate the
delay start time and will countdown until cycle
starts.
To cancel the DELAY TIME option and begin the
cycle before the delay period is over, press the
START/CANCEL touchpad.
Child Lock Controls
To prevent children from accidently starting the
dishwasher, lock the dishwasher controls by
pressing and releasing the AIR DRY touchpad for 3
seconds. All the buttons except AIR DRY will be
OFF and the display will indicate “Loc” and no new
selections can be made until the lock is released.
To unlock the controls, press the AIR DRY touchpad
for 3 seconds, the unit will display the last cycle
ran.