Filter
Top Products
What to do if ...
24
Temperature is set too
cold.
Press „+“ (WARMER) but-
ton.
Appliance cools too much.
Heavy build up of frost,
possibly also on the door
seal.
Door seal is not air tight
(possibly after reversing
the door).
Carefully warm the leaking
sections of the door seal
with a hair dryer (on a
cool setting). At the same
time shape the warmed
door seal by hand such
that it sits correctly.
Symptom Possible Cause
There is a malfunction.
Inform your local Service
Force Centre. Do not open
the door of the appliance
any more.
Remedy
All the lights in the tem-
perature display are flash-
ing.
The food is too warm.
Temperature is not proper-
ly adjusted.
Please look in the “Starting
up and Temperatur regula-
tion” section.
Door was open for an
extended period.
A large quantity of warm
food was placed in the
appliance within the last
24 hours.
The appliance is near a
heat source.
Open the door only as long
as necessary.
Press COOLMATIC
and/orFROSTMATIC button.
Please look in the
“Installation location” section.
Light bulb is defective.
Interior lighting does not
work.
Please look in the “Changing
the light bulb” section.
Unusual noises.
Appliance is not level.
The appliance is touching
the wall or other objects.
Readjust the feet.
Move the appliance
slightly.
The compressor does not
start immediately after
pressing the COOLMATIC
or FROSTMATIC button, or
after changing the tem-
perature setting.
This is normal, no error has
occurred.
The compressor starts after
a period of time.