Filter
Top Products
COOLMATIC Button
The COOLMATIC function is suited for quick cooling of
large quantities of goods in the refrigerator, e.g. drinks
and salads for a party.
☞
1. The COOLMATIC function is switched on by pressing the COOLMATIC
button. The yellow light illuminates.
2. The COOLMATIC function now provides for intensive cooling. A
DESIRED temperature of +2°C is automatically selected. The COOL-
MATIC function is ended automatically after a period of 6 hours. The
originally selected DESIRED temperature is again valid. The temperature
display shows the ACTUAL refrigerator temperature.
3. The COOLMATIC function can be ended manually at any time by press-
ing the COOLMATIC button again. The yellow light goes out.
If the COOLMATIC function is switched on the temperature setting may
not be changed.
Warning: The COOLMATIC and FROSTMATIC functions cannot be
switched on simultaneously.
Malfunctions
If the electronics in the appliance have detected a fault that prevents
the ACTUAL temperature being measured, the temperature display will
flash. The appliance will continue to function using a backup pro-
gramme until your local Service Force engineer has repaired the appli-
ance.
Switching off the appliance
To switch off, press the ON/OFF button until the mains power light
extinguishes.
If the appliance is not going to be used for an extended period:
☞
1. Remove all frozen and refrigerated packages.
2. Switch off the appliance by pressing the ON/OFF button until the
mains power light extinguishes.
3. Remove the mains plug or switch off or disconnect the electricity sup-
ply.
4. Defrost the freezer compartment and clean thoroughly (see section:
“Cleaning and Care”).
5. Leave the doors open to avoid the build up of odours.
☞
15