Filter
Top Products
7
To level the cabinet using the front rollers (select
models):
1 Remove the screw from each side of the toe grille
(see illustration).
2 Pull the toe grille forward and lift it off (see
illustration).
Installation
6 Replace the toe grille by fitting it into place and
replacing the screws.
5
contacts the floor.
NOTE
The anti-tip leg must be in contact with the floor to
keep the refrigerator stable. DO NOT use the anti-tip
leg to level the refrigerator.
3 Use a flat-blade screwdriver or ³⁄₈-inch socket
wrench to raise or lower the front rollers.
4 Ensure both doors are bind-free with their seals
touching the cabinet on all four sides.