Electrolux 261 GT Freezer User Manual


 
17
Pull out the plug of the defrost water
outlet at the bottom of the freezer.
To catch the defrost water, place the
freezing trays (not included with all
models), the dividing partition or
another flat receptacle under the
defrost water outlet.
Tip: To accelerate the defrosting
process, place a saucepan with hot
water in the appliance and close the
lid. Remove pieces of ice that break away before defrosting is complete.
After defrosting thoroughly clean the freezer interior, as well as
interior accessories (see section: "Cleaning and Care").
Cleaning and care
For hygienic reasons the appliance interior, including interior accessories,
should be cleaned regularly.
Warning!
The appliance may not be connected to the power supply whilst it is being
cleaned. Electric shock hazard! Before cleaning, pull out the mains plug or
switch off or disengage fuse.
Never clean the appliance with a steam cleaner. Moisture could
accumulate in electrical components, danger of electrical shock! Hot
vapours can lead to the damage of plastic parts.
Take care that no fluid enters the control panel on the handle or any other
electrical parts.
The appliance must be dry before it is placed back into service.
Important!
Ethereal oils and organic solvents can attack plastic parts, e.g.
- Juice from lemon or orange peel;
- butyric acid;
- cleansers which contain acetic acid.
Do not allow such substances to come into contact with parts of the
appliance.
Do not use any abrasive cleansers.