Filter
Top Products
Folding down the heating element
1. Remove the shelf support rails.
2. Hold the heating element with the two
hands at the front
3. Pull it forwards against the spring pres-
sure and out along the support on both
sides.
4. The heating element folds down.
The oven ceiling is ready to clean.
Installing the heating element
1. Install the heating element in opposite se-
quence.
Install the heating element correctly on the two sides above the support on the inner wall
of the oven.
2. Insert shelf support rails.
Removing the drawer
The drawer underneath the oven can be removed for easier cleaning.
Removing the drawer
1. Pull the drawer out as far as possible.
2. Lift the drawer slightly, so that can be lif-
ted upwards at an angle of the drawer
guides.
Inserting the drawer
1. Set the drawer on the drawer's support
rails. Make sure that drawer's middle
guide engages into the middle rail.
2. Lower the drawer to the horizontal and
push it in.
WARNING!
When the oven is in use, heat can build up in the drawer. For this reason, do not keep flam-
mable things in there such as e.g. cleaning materials, plastic bags, oven gloves, paper, clean-
ing sprays, etc.
Oven lamp
WARNING!
There is a danger of electrical shock!
Before you change the oven lamp:
• Switch off the oven.
• Remove the fuses in the fuse box or switch off the circuit breaker.
1
2
Oven - Care and Cleaning 23