Filter
Top Products
9
Surface Cooking
Surface Cooking
Surface Cooking
Burner Cap
PLACEMENT OF BURNER HEADS AND CAPS
For the 18 000 BTU burner :
Place the burner head over the gas opening (Figure 1).
Be careful not to damage the electrode while placing
the burner head over the orifice. Make sure electrode
fits correctly into the hole in the burner head.
For all burners :
Place a burner cap on each burner head (see Figure 2),
matching the cap size to the head size. The cap for each
burner has an inner locating ring which centers the cap
correctly on the burner head. Be sure that all the burner
caps and burner heads are correctly placed BEFORE
using your appliance.
Make sure each burner cap is properly aligned and level.
Turn the burner on to determine if it will light. If the burner
does not light, contact a Service Center. Do not service
the sealed burner yourself.
Figure 2
Figure 1
Burner
Head
Gas
Opening
LOCATIONS OF THE BURNERS
The 30” cooktop is equipped with different sized burners.
The surface burners are located on the cooktop as follows (See Figure):
-a 5 000 BTU (natural gas) burner located at the right rear position;
-a 14 000 BTU (natural gas) burner located at the left rear position;
-a 18 000 BTU (natural gas) burner located at the left front position;
- and a 18 000 BTU (natural gas) burner located at the right front position.
30” cooktop
The 36” cooktop is equipped with different sized burners.
The surface burners are located on the cooktop as follows (See
Figure):
-a 5 000 BTU (natural gas) burner located at the center rear position;
-a 9 500 BTU (natural gas) burner located at the right rear position;
-a 14 000 BTU (natural gas) burner located at the left rear position.
-a 14 000 BTU (natural gas) burner located at the center front
position.
-a 18 000 BTU (natural gas) burner located at the left front;
- and a 18 000 BTU (natural gas) burner located at the right front
position.
36” cooktop