Electrolux 502 D Ventilation Hood User Manual


 
5
The appliance must be connected to fixed wiring with a double
pole switched fused spur outlet with or without pilot lamp.
We strongly recommend the appliance to be connected only by
a qualified electrician who is a member of the NICEIC who will
comply with the IEE and any local regulations.
NOTE:
The terminology “DOUBLE POLE” means that both the live
and the neutral supplies are switched and disconnected at
the same time.
The terminations labelled SUPPLY are for the connection for the
internal house wiring and the terminations labelled LOAD are
for the appliance.
IMPORTANT
The wires of the mains lead supplied with this appliance are
coloured in accordance with the following code:
Blue-Neutral
Brown-Live
As the colours of the flexible cord of this appliance may not
correspond with the coloured markings identifying the ter-
minals in the plug, proceed as follows: The wire which is
coloured brown must be connected to the terminal which is
marked with the letter L or coloured red.
The wire which is coloured blue must be connected to the
terminal which is marked with the letter N or coloured black.
N
LOAD
L
SUPPLY
L
LOAD
N
SUPPLY
DP 13A, 250V
BLUE
(NEUTRAL)
BROWN
(LIVE)
FUSE
ON
Appliances
with 2 wires
Electrical connection for the UK