Filter
Top Products
11
Adjusting the dose
The correct dosage of the rinse-aid should be regulated on the basis of the shine and
drying results.
For this purpose, set the quantity of liquid by
means of the six-position selector (C) located
on the inside of the filler opening (minimum
quantity is position 1, maximum quantity is
position 6).
Use the tip of a screwdriver to rotate the
selector. If drops of water or white marks
remain on the crockery after it has been
washed, increase the dosage. If the crockery
comes out with whitish, sticky streaks, reduce
the dosage.
BR02
C
m
a
x
6
5
4
3
2
1
152976 17/1 15-09-2001 9:10 Pagina 11