Filter
Top Products
11
To set a different level, proceed as follows:
1. Press the "Intensive 70°" and "Bio 50°" programme push buttons simultaneously
for about 5 seconds. The pilot light corresponding to the current level flashes.
2. Press within 5 seconds the programme push button corresponding to the
required level. After 5 seconds the dishwasher will memorise the new level setting
and will return to programme setting mode.
The setting will remain memorised after switching off the dishwasher.
SO292
If your water hardness is level 1 it is already soft and therefore there is no need
to use salt. With the setting of the water softener at level 1 the salt indicator
light on the control panel will always remain off.
Water hardness
dH°
(german degrees)
°TH
(french degrees)
PPM
(parts per million)
Use
of salt
Level
0 - 8
9 - 20
21 - 40
41 - 70
71 - 90
0 - 4
5 - 11
12 - 22
23 - 39
40 - 50
0 - 80
81 - 200
201 - 400
401 - 700
701 - 900
NO
YES
YES
YES
YES
1
2
3
4
5
152985 84/3 21-07-2003 11:49 Pagina 11