Filter
Top Products
Components:
1 off Side rail, right SL R
1 off Side rail, left SL L
4 off Spacer 4 mm DS 1
4 off Spacer 3mm DS 2
4 off Spax screw 4.0 x 20 galvanised SCHR
762
562-
568
16-
19
510min.
546
574
759
16
19
Detail B
Detail A
neighbouring
edge
A+B
19
21
100
759
DS 1
DS 2
SL L
SCHR
SL R
SL L
SL L
600
550
570
3
Assembly Instructions for the Side Rail Assembly Kit
Procedure:
Frame side panel thickness 19 mm:
- Remove the protective tape of the two spacing washers (DS 1) mounted on the side rails (SL R + SL L).
- Position the side rail (SL L): > Lower side (open) lying on the floor of the niche
> Edge lying against the side panel of the frame (see Detail A).
- Press on and fix the side rail (SL L), and secure with the supplied screws (2x SCHR
- Repeat this procedure for side rail SL R.
Frame side panel thickness 16 mm:
- Remove the protective tape of the two spacing washers (DS 1) mounted on the side rails (SL R + SL L).
- Stick the separately-supplied 3 mm spacing washers (SL R + SL L) over the pre-mounted 4 mm spacing washers
(DS 1) as shown in Detail B.
The adhesive tape of the 3mm spacing washer (DS 2) must be on the outer side.
- Continue as described for the 19 mm thick frame side panel.
153 0771 03 / 03.98