Filter
Top Products
You can wash the removable parts in very hot soapy water. You may
use mild abrasives. Make sure that the electrode and the hole and slots
in the crown are not blocked with food or cleaning materials.
Clean the burner crowns by soaking them in very hot soapy water.
You can remove any stubborn stains by scouring with a soap filled pad
such as 'Brillo'. If you look after the burner crowns in this way they will
stay reasonably clean. However the surface will dull with time.
Aluminium based saucepans can leave
shiny metal marks on the pan supports. Clean
regularly to remove the marks using a mild
abrasive like 'Jif' with a soft scourer. For more
stubborn marks you can use a soap filled pad
such as 'Brillo'. After cleaning the cooker parts, dry them thoroughly
before you put them back.
When replacing hotplate burner parts
1. Crown to body (Do not try to force the
crown onto the body). Make sure that the
hole in the crown is centrally over the
electrode. Check that the two longer
location pegs sit in the slots in the body.
When the crown is in this position let it
fall freely on to the body. Check that the
crown can be moved slightly from side to
side.
2. Cap to crown. Place cap centrally on the
top of crown (enamel side up). Move
sideways and front to back to check the
cap is fitted properly.
3. Check for ignition.If a burner will not light
then you need to check the crown and
cap positions.
The grill
Clean the area around the grill frequently using hot soapy water.
After use you can soak the pan for a few minutes and then clean it
using mild abrasives or a soap filled pad such as 'Brillo'.
Clean the grill shelf using hot soapy water. Mild abrasives can be
used if necessary.
If the grill shelf is removed it must be
replaced the right way up. The outer wires
must be curved upwards.
L Y R I C 5 5 G
21
Care and cleaning