Filter
Top Products
• program duration,
• remaining time to the end of the program,
• end of a washing program,
• number of hours in delay start,
• fault codes,
• deactivation/activation of the audible signals.
Delay start button
Use the delay start button to delay the start of the washing program with an interval be-
tween 1 and 19 hours. Refer to 'Select and start a washing program'.
Function buttons
Use the function buttons for these operations:
• to set the water softener. Refer to 'Setting the water softener'.
• to deactivate/activate the audible signals. Refer to 'Deactivation/activation of the audible
signals'.
• to activate/deactivate the multitab function. Refer to 'Multitab function'.
• to deactivate/activate the rinse aid dispenser when multitab function is active. Refer to
'Multitab function'.
• to cancel the washing program in progress or a delay start in progress. Refer to 'Select
and start a washing program'.
Setting mode
The appliance must be in setting mode for these operations:
• To set a washing program.
• To set the water softener level.
• To deactivate/activate the audible signals.
• To deactivate/activate the rinse aid dispenser.
Press the on/off button. The appliance is in setting mode when:
– All the program indicator lights are on.
Press the on/off button. The appliance is not in setting mode when:
– Only one program indicator light is on.
– A washing program is set. It is necessary to cancel the program to go back to the setting
mode. Refer to "Select and start a washing program".
Audible signals
You can hear an audible signal:
• at the end of the washing program,
• during the setting of the level of the water softener,
• when the appliance has a malfunction.
The activation of the audible signals is set at the factory.
Do these steps to deactivate the audible signals:
1. Switch on the appliance.
2. Make sure that the appliance is in setting mode.
3. Press and hold function buttons B and C until the indicator lights of function buttons
A, B and C start to flash.
4. Press the function button C.
Control panel
9