Filter
Top Products
17
Safety cut-out
Cooking surface
• If after switching on the cooking surface, a heat setting is not set for
a cooking zone within approx. 10 seconds, the cooking surface auto-
matically switches itself off.
• If one or more sensor fields are covered for longer than approx. 10
seconds, e.g. by a pan placed upon it, a signal sounds and the cooking
surface switches off automatically.
• If all cooking zones are switched off, the cooking surface automati-
cally switches itself off after approx. 10 seconds.
Control panel
3 Moisture (e.g. a wet cloth) or liquid boiling over onto the control panel
immediately switches all cooking zones off.
Induction cooking zones
• In the event of overheating (e.g. when a pan boils dry) the cooking
zone automatically switches itself off. _ is displayed. Before being
used again, the cooking zone must be set to 0 and allowed to cool
down.
• If cookware that is not suitable is used, f flashes in the display and
after 10 minutes the display for the cooking zone switches itself off.
all cooking zones
• If one of the cooking zones is not switched off after a certain time, or
if the heat setting is not modified, the relevant cooking zone switches
off automatically.
Heat setting Switches off after
V, 1 - 2
6 hours
3 - 4
5 hours
5
4 hours
6 - 9
1.5 hours