Filter
Top Products
Electrolux air-o-chill
Blast Chiller/Freezers 70kg 10GN2/1
Internet: http://www.electrolux.com/foodservice
HDBB0402009-10-06Subject to change without notice
WATER REMOTE UNIT CHILLER+C/FREEZER 70KG 880058
TROLLEY FOR SLIDE-IN RACK 10 GN 2/1-LW 922042 922042
TRAY RACK+WHEELS 8 GN 2/1,80MM PITCH-LW 922045 922045
TRAY RACK+WHEELS 10 GN 2/1,65MM PITCH-LW 922043
PRINTER FOR HACCP BASIC VERSION 881532 881532
PASTRY(400X600)RACK+WHEELS-80MM,10 2/1LW 922067 922067
KIT HACCP EKIS 922166 922166
KIT HACCP ADVANCED CONNECT. BC/BCF LW+CW 880183 880183
KIT 6 WHEELS FOR BLAST C/FREEZER 70KG-US 880141
KIT 3 SINGLE SENSOR PROBES FOR BC/BCF 880269 880269
AIR REMOTE UNIT CHILLER+C/FREEZER 70KG 880057
2 SINGLE SENSOR PROBES CHILLER+C/FREEZER 880096 880096
1 SINGLE SENSOR PROBE CHILLER+C/FREEZER 880089 880089
ACCESSORIES
SLIDE-IN RACK SUPP.10 2/1 BC+BCF 70KG-LW 1 1
3-SENSOR PROBE FOR CHILLER+C/FREEZER 1 1
INCLUDED ACCESSORIES
Net weight - kg. 320 290
installed-electric 4.969 0.45
Power - kW
at evaporation temperature - °C -25 -10
Refrigerant power
Refrigeration power - W 4781 9320
Refrigerant quantity - g. 5480
Refrigerant type R404a R404a
N° defrost in 24 hrs. 3/30' 3/30'
Compressor power - HP 3,9;
Max load capacity - trays h 65 mm - n° 10 10
Trays type GN 2/1 GN 2/1
Door hinges Left Left
N° and type of door 1 1
height 1730 1730
depth/with open doors 1148 1148
width 1250 1250
External dimensions - mm
Thermometers Digital Digital
Thermostat Electronic Electronic
Control type Electronic Electronic
Cooling unit Built-In Remote
UK Guide lines - chilling / freezing 70, 70 70, 70
NF Regulations - chilling / freezing 50.4, 50.4 50.4, 50.4
Productivity per cycle - kg.
Type Blast freezer - 70 kg Blast freezer - 70 kg
TECHNICAL DATA
AOFP102C
726751
AOFP102CR
726782
CONSTRUCTION
• Internal and external finishing in 304
AISI stainless steel and back panel in
stainless steel.
• High density polyurethane
insulation, 60 mm tickness, HCFC
free.
• Environmentally friendly: R404a as
refrigerant fluid.
• Developed and produced in ISO
9001 and ISO 14001 certified factory.
• Inner cell with fully rounded corners.
• Door equipped with removable
magnetic gasket with hygienic design.
• All motors and fan waterproof
protected IP20.
• Evaporator with anti rust protection.
• Ventilator (fan) swinging hinged
panel for access to the evaporator for
cleaning.
• Automatic heated door frame.
• Solenoid valves.
• 1 thermostatic expansion valve.
• Feet 150 mm high.
• Stand alone printer as optional, built
in on request.
• PC connection on request, gate RS
485.
INSTALLATION
• No water connections required.
• Waste can be plumbed into drain,
but can also be collected in optional
waste container.
Installation diagram:
C - Water drain
I - Electrical connection
Y - Connection for appliance lifting
L - Remote electrical connection
N - Cooling water inlet
O - Cooling water outlet