Filter
Top Products
Electrical requirements
Warning:
This appliance must be earthed.
This appliance complies with the
following EC Directives:
-73/23/EEC-Low-VoltageDirective
-89/336/EEC -EMC Directive.
Testing has been carried out in accordance
with EN 153 regarding the determination of
freezer capacity,energy consumption and
temperature rise time.
Description of equipment
Control panel:
electrolux cold 9
Installation
Position
Place the freezer horizontally on a
firm surface, resting on all wheels.
Use a wooden block or similar object
to compensate for any bumps/holes in
the surface.
The room should be dry and adequate-
ly ventilated.
Temperatures of the external environment
have an impact on the energy consump-
tion of the freezer. Therefore:
- do not place the freezer in a position
exposed to sunshine or beside a radiator
oven, or any other source of heat.
- position it where the temperature of the
environment corresponds to the
climatic classification for which the
freezer was designed.
Climatic classification Ambient temperature
limits
From….to
SN +10 to +32 C
N +16 to +32 C
ST +18 to +38 C
T +18 to +43 C
If the freezer has been handled in a
vertical position it should be allowed to
stand in normal position for about 12
hours before switching it on.
Please ensure that when the appliance
is installed it is easily accessible for the
engineer in the event of a breakdown.
Signal lamp of the control section
(green).
Signal lamp (yellow) for quick freezing.
Acoustic alarm and alarm signal lamp
(red).
Push button:
- for reset acoustic alarm
- for start quick freezing mode
- for stop quick freezing mode
1.
2.
3.
4.
Before switching on, make sure that the
voltage of your electricity supply is the
same as that indicated on the rating
plate, located on the back of the cabinet.
Electrical Connection
Any electrical work required to install this
appliance should be carried out by
a qualified electrician or compe-
tent person.
This appliance must be earthed.