Filter
Top Products
3
Description of the cooker hood
Accessories
The following are included with the cooker hood.
● 1 Adaptor 150-125 mm
● 2 Tube clamps
● 1 hood canopy complete with controls, lighting and fan motor.
● 1 telescopic chimney stack formed by: U-shaped upper section and U-
shaped lower section.
● 1 reduction flange Ø 150-125 mm.
● 1 recirculation spigot.
● 1 plastic bag containing: 2 wall hooks to fix the canopy hood, 1 wall
bracket to fix the chimney, rawl plugs, screws, and documentation.
The following can be ordered from your retailer:
● Carbon, KF8 filter, alternatively KFL 60/80.The carbon filter is to be used
when the hood is connected to the recirculation mode.
Fig. 1
Functions
There are two possible systems:
● Extraction of air to the outside using an
optional venting kit and evacuation
duct.
● Recirculation using an optional carbon
filter.
Disposal
● Prevent accidents when disposing of your cooker hood. Disconnect the
power plug from the wall socket and cut the power cord at the hood
inlet.Contact your local authority for information on where to dispose of
the cooker hood.
Use of cooker hood
● This appliance is for domestic use only in a normal household.
● Never leave any deep-frying, melting fat, paraffin or any other
inflammable liquid unattended on the hob. In the event of fire:
Immediately switch off the cooker hood and the cooker. Note! Cover
the fire. Never use water.
● Never do any flambé cooking underneath the cooker hood. It can cause
a fire. Remember that overheated fat may spontaneously ignite. Never
leave the frying pan unattended.
● It is essential that the grease filter is regularly cleaned to help avoid fat
dripping on to the hot zone and causing a fire. Read the section on
“Maintenance and Cleaning” in the instruction book.