Filter
Top Products
Operating instructions
31
7. End of the washing programme
The dishwasher will automatically stop and an audible signal
informs you of the end of the washing programme.
When the washing programme has ended, the optical signal on the
floor beneath the dishwasher’s door will turn off.
Open the dishwasher door only when this optical signal turns off.
If the door is not immediately opened at the end of the
programme, air will circulate inside the dishwasher to prevent
residual steam recondensing on the dishes as water droplets.
This device operates intermittently for about 20 minutes, as
long as the dishwasher is switched on.
If the On/Off button is pressed or the door is opened during these
20 minutes, the device will be automatically cancelled.
Open the dishwasher’s door, leave it ajar and wait a few minutes
before removing the dishes; in this way they will be cooler and the
drying will be improved.
In the digital display appears 0 (remaining programme time), only
in this case the programme has ended.
Switch off the dishwasher by pressing the On/Off button.
8. Unloading the dishwasher
Hot dishes are sensitive to knocks. The dishes should therefore be
allowed to cool down before removing from the appliance.
Empty the lower basket first and then the upper one; this will
avoid water dripping from the upper basket onto the dishes in the
lower one.
Water may appear on the sides and the door of the dishwasher as
the stainless steel will eventually become cooler then the dishes.
When the washing programme has finished, it is recommended
that the dishwasher is unplugged and the water tap turned off.
152955 32/0en 31-03-2005 9:04 Pagina 31