Filter
Top Products
Operating Instructions
25
Start the Wash Programme
0 1. Open the door of the dishwasher.
2. Check that when the dishes and cutlery are loaded into the dishwasher
the spray arms are free to rotate.
3. Open the tap fully.
4. Press the ON/OFF button. The indicator in the ON/OFF button illumi-
nates.
5. Press the programme button for the desired programme (see "Pro-
gramme Table"). The programme indicator illuminates.
Have you accidentally selected the wrong wash programme?
• If you want to change the wash programme within 6 seconds of
making a programme selection, briefly press the button for the new
wash programme.
• If you want to change the wash programme at a later point in time,
use the following procedure:
– Press the button for the new wash programme and hold it pressed.
The indicators for both programmes now flash.
– After a few seconds only the indicator for the new programme
flashes. Release the programme button, the new wash programme
has been saved.
6. Close the door. After around 6 seconds the selected wash programme
begins.
3
If acoustic warning tones can be heard after the start of the pro-
gramme, please read the "What to do, if..." section.
Deleting a Wash Programme
A selected wash programme can only be deleted when the door of the
dishwasher is still open, however a programme cannot be deleted in the
first 6 seconds after making a programme selection.
After 6 seconds the wash programme can be deleted as follows:
0 1. Press the button for the current wash programme and hold it pressed.
The programme indicator for the current wash programme flashes for a
few seconds and then extinguishes.
2. Release the programme button, the wash programme is deleted.
3
A selected programme is not deleted by switching off the dishwasher.